WELD-ON 16 (44ml) Acrylic Glue – Clear

Our preferred premium grade glue

Suitable for acrylic & plywood. (not suitable to be used with mirror acrylic) 

WELD-ON 16 is a very high strength, clear, medium bodied, fast curing, solvent-type acrylic cement. Applied to cast, molded or extruded acrylics, it will affect initial bonds very quickly so some parts may be handled within a few minutes. Bond strength continues to develop very rapidly reaching a substantial level and forming strong joints within hours.  Joints are water and weather resistant and will generally have similar physical and chemical properties to acrylic plastic. Colour: Clear Contents of Tube: 2.5 Fl. Oz. U.S. (44 ml)

Directions: Store below 27 degrees

• Parts to be joined should be clean and fit without forcing.
• Remove protective masking paper from acrylic sheet. Apply a bead of #16.
• Join pieces gently allowing cement to wet both surfaces.
• Hold or clamp firmly until set. Allow 24 hours for good cure and joint strength.

This glue is not suitable to be used with our mirror acrylic

PLEASE NOTE: Weld on 16 glue can only be shipped via standard postage road train due to the hazardous nature of the chemicals contained in this product. Please do not order this via express postage as your full order will be sent via standard post road train only as default.