E6000 Glue – Crystal Clear – 40.2g
Original price was: $15.95.$12.00Current price is: $12.00. inc GST
E6000 is the worlds leading industrial strength adhesive. It provides a superior bond between practically any two surfaces.
Suitable to be used on – Acrylic, Metal, Wood, Fabric, Glass, Ceramic & more!
Instructions
Follow these step-by-step directions when using E6000 Craft:
We recommend you read all directions and perform a small test before use.
1. Surfaces should be clean, dry and free of dirt. For best results, roughen surface slightly before use.
2. Puncture seal in neck of tube using pointer cap. Application temperature 10 to 32 °C (50 to 90 °F)
3. Apply directly to the surfaces to be bonded or repaired.
4. Allow around 24 hours to curing. Maximum bond strength may take upto 72 hours.
5. Apply a thin coat of petroleum jelly to the thread of the tube before replacing the cap.
6. Uncured adhesive can be cleaned off with acetone or citrus-based solvents.
Note: E6000 is not recommended for use on styrofoam, polystyrene, polyethylene or polypropylene plastics.
PLEASE NOTE: Weld on 16 glue can only be shipped via standard postage road train due to the hazardous nature of the chemicals contained in this product. Please do not order this via express postage as your full order will be sent via standard post road train only as default.
Only 10 left in stock|We will refund any order placed, minus processing fees if the items are not from the clearance category. days
Description
E6000 is the worlds leading industrial strength adhesive. It provides a superior bond between practically any two surfaces.
Suitable to be used on – Acrylic, Metal, Wood, Fabric, Glass, Ceramic & more!
Instructions
Follow these step-by-step directions when using E6000 Craft:
We recommend you read all directions and perform a small test before use.
1. Surfaces should be clean, dry and free of dirt. For best results, roughen surface slightly before use.
2. Puncture seal in neck of tube using pointer cap. Application temperature 10 to 32 °C (50 to 90 °F)
3. Apply directly to the surfaces to be bonded or repaired.
4. Allow around 24 hours to curing. Maximum bond strength may take upto 72 hours.
5. Apply a thin coat of petroleum jelly to the thread of the tube before replacing the cap.
6. Uncured adhesive can be cleaned off with acetone or citrus-based solvents.
Note: E6000 is not recommended for use on styrofoam, polystyrene, polyethylene or polypropylene plastics.
PLEASE NOTE: Weld on 16 glue can only be shipped via standard postage road train due to the hazardous nature of the chemicals contained in this product. Please do not order this via express postage as your full order will be sent via standard post road train only as default.
